Phone: (419) 596-3202
Sales Team:
Brian Ellerbrock – briane@verhoff.com (extension: 1009)
Brian Gilgenbach – briang@verhoff.com (extension: 1008)
Verhoff Machine & Welding, Inc.
7300 Road 18
Continental, OH 45831
Our CNC Lasers allow for rapid prototyping, greater accuracy, and a faster turnaround than traditional tool driven CNC machines. In the Fall of 2018, we installed our newest Fiber TruLaser that can run up to speeds of 280m/min. See details below.
NEW! Trumpf TruLaser 5040 Fiber |
Trumpf Trumatic L6050 Laser |
|
|
Trumpf Trumatic L6030 CNC Laser |
Trumpf TruLaser 5040 with Lift Master |
|
|
VM&W specializes in painting parts for a wide range of industries. We require certification for these different types of paint, from prep to the finished product and are EPA compliant. Our down draft primer booth, down draft paint booth, and primer and paint ovens are all located at our facility, which simplifies the painting process for our customers.
Industries
|
Part Prep Available
|
Painting Available
|
Our Machining department is offered as a support department to the rest of VM&W. We can put the finishing touches on your project with the ability to turn, mill, drill, chamfer, bevel, and cut keyways. We also have MasterCam off-line programming that assists in reducing down time, which in return, allows our customers to save.
Horizontal Machines |
Verticle Machines |
Other Machines |
|
|
|
Our Press department uses state-of-the-art CNC equipment including three Trumpf V-Series Trumabends. VM&W has the equipment and flexibility to bring your needs into production.
Trumpf Trumabend V-230 |
Trumpf Trumabend V-130 |
|
|
Trumpf Trumabend V-85 |
Cincinnati 600 ton |
|
|
Our Flow AF-2080 Water Jet is capable of processing up to 8″ thick material with a width up to 8’x20′. The system is also able to handle a wide array of materials including steel, aluminum, composites, rubber, ceramic, and stone. The mechanism creates a ready-to-use satin, smooth edge with no heat affected zones. It also allows closer nesting of pieces, which saves production time and raw material.
SAWING & SHEARING
VM&W has a variety of equipment to handle your sawing, shearing, and iron working needs.
VM&W welds Mild Steel, Stainless Steel, and Aluminum. We also offer robotic welding for your production needs.
The Lincoln Electric Dual Arm System 55 Robotic Cell includes two Fanuc 100 iBe robotic arms equipped with Binzel LEA 500 amp air cooled welding torches.
The cell consists of two work zones. Each work zone has a head/tail stock positioner with a work envelope length of 84” and a turning diameter of 54”. The two arms are programmed with one Fanuc R-J3iC robot controller.
The cell is also equipped with two Powerwave 455M welding units with 450 amp output at 100% duty cycle.
Browse our gallery below to view some of the work we have done for our commercial clients. At Verhoff Machine & Welding we are committed to exceptional quality, precision workmanship, and meeting our customers’ every need.
